Sized for large vehicles
For vehicles up to 18 m long, 2.6 m wide and 4.3 m high. The stated installation area is 22 × 5 × 5.5 m.
Automatic Car Wash Systems
GLOAB BS105 Bus & Truck Gantry Wash System
Contour-following gantry wash and powerful air drying for buses, trucks and trailers.
Product Code: GLOAB-BS105
Contour-following gantry wash and powerful air drying for buses, trucks and trailers.
Product overview
GLOAB BS105 Bus & Truck Gantry Wash System
GLOAB BS105 is a contour-following gantry wash designed for buses, trucks, trailers, containers and other large commercial vehicles. Top and side nozzles, pre-soak, water wax and eight air blowers support a complete wash-and-dry process.
18 mmaximum stated vehicle length
12 MPahigh-pressure wash
8 × 5.5 kWair blowers
3–4 vehicles/hourcatalog capacity estimate
TECHNICAL INFORMATION
Key features
12 MPa high-pressure washing
Top and side nozzles clean roof, front, rear and side surfaces as the gantry follows the vehicle contour.
Eight powerful air blowers
Four top and four side blowers, each rated at 5.5 kW; the catalog describes simultaneous drying.
Commercial-site capacity
The catalog estimates 15–20 minutes per vehicle and approximately 3–4 vehicles per hour.
GLOAB BS105 Bus & Truck Gantry Wash System
Wash stages
- 01Contour-following gantry movement
- 02Pre-soak and chemical application
- 03Top and side high-pressure wash
- 04Water-wax application
- 05Drying with eight air blowers
TECHNICAL INFORMATION
Technical information
ModelCBK BS105
Vehicle typesBus, truck, trailer, container and special vehicles
Maximum wash size18 × 2.6 × 4.3 m (L × W × H)
Installation area22 × 5 × 5.5 m; keep service access on both sides
Wash pressureUp to 12 MPa
Electrical supplyStandard 380 V, 3-phase, 50 Hz; customizable
Wash time per vehicle15–20 minutes (catalog estimate)
Consumption per vehicle300–500 L water; 600–800 ml chemical; about 3 kWh (catalog figures)
Drying4 × 5.5 kW top + 4 × 5.5 kW side blowers
Hourly capacityEstimated 3–4 vehicles per hour
GLOAB BS105 Bus & Truck Gantry Wash System
Warranty and service
- 3-year whole-machine warranty — BS105 catalog
- Installation, operating training and spare-parts support are described in the catalog
TECHNICAL INFORMATION
Technical catalogs and layouts
Technical values are based on the manufacturer catalogs and product information supplied; final configuration is confirmed at quotation stage.
